Homepage
Am Himmel
 
Lexikon
 
Finsternisse
 
Deep-Sky
 
Schweiz
  

ASpekt 2017 - FLECHAS-Spektrograph

Hier bieten wir UnterstĂĽtzung beim Einstieg in die Astrospektroskopie sowie eine Plattform fĂĽr den Erfahrungsaustausch.

Moderatoren: Thomas Blank, mkeiser

ASpekt 2017 - FLECHAS-Spektrograph

Beitragvon Patricia Otero » 24.06.2017 22:53

Liebe Spektroskopiker,

Carlos Guirao und Gerardo Avila von der CAOS-Gruppe stellen uns die Webseite zur VerfĂĽgung, wo die Informationen ĂĽber den Entwurf des FLECHAS-Spektrographen stehen:
https://spectroscopy.wordpress.com/2017/06/22/flechas-opto-mechanical-components/
Vielen Dank Carlos und Gerardo fĂĽr euren Beitrag!

Herzliche GrĂĽsse,

Patricia
Patricia Otero
 
Beiträge: 80
Registriert: 07.10.2009 21:08
Wohnort: 8902 Urdorf

Re: ASpekt 2017 - FLECHAS-Spektrograph

Beitragvon Patricia Otero » 27.07.2017 22:00

Liebe Spektroskopiker,

gerne stelle ich euch interessante Diskussionen über den FLECHAS-Spektrograph zur Verfügung. Da Carlos und Gerardo nicht deutschprachig sind, sind diese Beiträge auf Englisch. Ich hoffe, dass es für die meisten im Forum kein Problem ist.

On 23.07.17 22:08, Jan Sundermann wrote:
> Dear Carlos,
> dear Gerardo,
> during your presentation at Aspekte2017 was talk about the
> degradiation of
> optical fibres due to changes of the jacket inner surface.
> For example silver you mentioned, what is highest natural mirror,
> but does react with humidity to change for white oxidation and with
> sulfuric traces in air to become black sulfide surface.
> I then commented, stainless steel should do it also. Basically we have
> two types of stainless steel , the pure chromium steels of high strength,
> and the soft austenitic grades.
> Attached is a brochure of Outokumpu Stainless (in Germany formerly
> Thyssen Krupp Nirosta)
> which shows several grades of surface finish.
> Grade 2R / BA is practically a mirror. And certain stainless
> austenitic steel
> grades should be long time stable to keep such surface.
> It would be interesting to learn, if a manufacturer of optical fibres has
> tested such stainless grades, whose should be avaible as thin foils.
> Or in case, if they see possibility to process such material for a
> test fibre.
>
> Best regards,
>
> Jan

Hi Jan,
>>
>> During our presentation in Aspekt2017 Gerardo and I talked about the
>> degradation of silver coatings in mirrors, like the parabola collimator,
>> and optionally in echelle surfaces. We did not mention any degradation
>> of silver
>> coatings in optical fibers, where no such coatings are used. Sorry if we did
>> cause such confusion.
>>
>> As for mirrors made of stainless steel instead of glass coated with
>> standard aluminum (>85%), enhanced aluminum (>90%) or silver (>95%)
>> I ignore the reflectivity of stainless steel, but it has also to compete
>> with
>> glass in precision polished surfaces, flatness and thermal stability.
>>
>> Cheers
>> Carlos Guirao
Patricia Otero
 
Beiträge: 80
Registriert: 07.10.2009 21:08
Wohnort: 8902 Urdorf


ZurĂĽck zu SAG Fachgruppe Spektroskopie



27.01.2015 21:12 Uhr, Arnold Barmettler